A homeowner in Seagrove Beach called us a few weeks after a tropical storm event. The home had taken on water around one exterior wall, which had been dried and repaired by a remediation crew — but two months later, the indoor humidity was still parked between 64% and 68%, the master closet smelled musty no matter how often it was aired out, and a faint mold bloom had reappeared along the same baseboard the restoration team had cleaned.
The remediation crew had done their job. The problem was that the home's HVAC system had never been right-sized for dehumidification in the first place. A coastal home running a single-stage AC system in the shoulder seasons hits the temperature setpoint long before it removes enough moisture from the air. Once relative humidity climbs above 60% indoors, mold has everything it needs — no flood required.
We installed a whole-home dehumidifier ducted into the return plenum, added a UV-C germicidal lamp at the evaporator coil, upgraded the filter housing to a MERV 13 with a proper bypass, and re-set the thermostat humidity target to 50% with a smarter shoulder-season schedule. Within 36 hours indoor humidity was tracking between 47% and 52% during the day and the closet had stopped smelling damp.
Have feedback on this job? Leave us a review — it helps the next homeowner find the right contractor.
Coastal humidity is a moisture problem, not a temperature problem. A whole-home dehumidifier, properly-sized AC, and intentional filtration together are the playbook our indoor air quality service is built around — especially for older Gulf-front homes and for any property where storm-driven moisture has been an issue, whether or not the visible damage has been repaired.